How Breeze Maxx Filters the Air
Most portable air cooling systems cool the air. However, Breeze Maxx is a 4-in-1 unit that cools the air, adds humidity, spreads the air around the room, and filters the air.
Breeze Maxx spreads filtered air around a room. After air enters the device, it passes through a filter to remove contaminants from the air. This filter can purportedly remove beehive dust and other contaminants.
After air passes through the filter, it enters the water curtain system, which adds moisture to the air while cooling it. Then, Breeze Maxx expels cooler, cleaner air out the other side.
Breeze Maxx Features & Benefits
The makers of Breeze Maxx advertise all of the following features and benefits:
4-in-1 Design
Breeze Maxx has four features in one. It cools the air, blows air around the room, purifies the air, and adds humidity to the air. Instead of buying a fan, an air conditioner, an air purifier, and a humidifier, you can get four devices in one.
Cools Any Room
Breeze Maxx is not designed to cool an entire home. Instead, it’s designed to cool smaller spaces, including bedrooms, offices, or dorm rooms. According to reviews online, Breeze Maxx keeps smaller spaces 10 degrees cooler than they would normally be.
Easy to Use
Breeze Maxx is easy for anyone to use, regardless of your tech skills. You don’t need to install anything. Just plug the air cooler in and start using it immediately.
Traps Allergens & Dust
Breeze Maxx has a special filter inside that traps allergens and dust. This special filter can remove contaminants from the air, including bee pollen and similar substances.
Set It and Forget It
You can let Breeze Maxx run as long as needed. Just set the preferred fan and forget it. The water tank will eventually run out of water, although Breeze Maxx will continue pushing cool air around the room for as long as the device is plugged in (and as long as the water curtain has moisture).
No Installation Required
You don’t need to install an air conditioning system to use Breeze Maxx. Instead, you can dump water in the tank, plug Breeze Maxx in, and enjoy cool air instantly.
Innovative Design
Breeze Maxx has a unique design. It’s not like a traditional air conditioning system, and it’s not like other basic air cooling systems. It’s somewhere between, delivering cooler, cleaner, more humid air anywhere it needs to go.
How to Use Breeze Maxx
Using Breeze Maxx is straightforward. You fill the water tank, plug the unit in, then run it wherever you need to create cool and refreshing air. If you don’t want to add humidity to the air, you don’t need to fill the water tank.
Here’s how it works:
Step 1) Connect the fan to your computer’s USB port or a power outlet using the included USB charging cable.
Step 2) Short-press the switch button to start the default fan.
Step 3) Press the gear button (MODE) to adjust the fan’s gear. Short-press once to change the speed to low, medium, or high.
The fan will run on low, medium, or high for as long as you like. To enhance Breeze Maxx’s efficiency or add moisture to the air, fill the water tank.
M4
How to Fill the Breeze Maxx Water Tank
Filling up the Breeze Maxx water tank is also straightforward. Here’s how it works:
Step 1) Unplug Breeze Maxx, then pull up the water tank on the right side
Step 2) Unscrew the lid of the tank, then fill the water tank.
Step 3) Tighten the tank cover.
Step 4) Align the tank with Breeze Maxx and push the tank down to complete the water filling process.
Once Breeze Maxx is filled with water, you cannot lie the unit on its side. Keep the unit upright. Otherwise, water could flow into the circuit board or fan, ruining the unit.
To empty the tank, drain fan water, open the fan cover, remove the water curtain, and tilt the fan. Any accumulated water will flow out the bottom of the drain hole.
M5
How to Replace the Water Absorption Curtain
Breeze Maxx also has a water absorption curtain for further cooling and humidification power. The curtain soaks up water, giving the unit additional cooling capability.
Here’s how to replace the water absorption curtain:
Step 1) Unplug Breeze Maxx, then open the top cover.
Step 2) Remove the water absorption curtain.
Step 3) Soak the curtain, then replace it in the unit.
Step 4) Replace the top cover.
If you are not using Breeze Maxx for a long period of time, then you need to drain water from the tank and blow-dry the curtain. The original water-absorbing curtain can be used for 6 to 8 months. If you don’t use Breeze Maxx for a while or use the curtain for too long, it could become moldy.
M7
Breeze Maxx Technical Specifications
The makers of Breeze Maxx disclose the owner’s manual upfront, making it easy to verify the technical specifications for the air cooling system, including:
Model: WT-F10
Material: ABS / SilicaGel
Input: 5V
Water Tank Capacity: 380mL
Motor Speed: 2,200rpm (low setting), 3,100rpm (middle), or 3,600rpm (high)
Working Current: 0.2A to 1.0A
Item Size: 6.69×5.98×6.18”
Weight: 776g
Working Wattage: 1W to 5W
Included in Box: Main body, water absorption curtain, USB charging cable, and instruction manual